|
|
Charnwood - Multi-Fuel Stoves - Island |
|
The Charnwood Island. It's a whole new way of thinking in stoves. It's the simplicity of the
stove that takes your eye in the first place. The way it looks; its uncomplicated handsome but
robust lines - and the unmistakable mark of quality. Everything about the Charnwood Island says,
this is a well-made and well-engineered stove.
Appreciate the gentle curves; see the quality of the handle and how good it feels as you open the
door to replenish the fire. And notice how cool it is to the touch. Good for you; good for your
family.
Look deeper. Find the unique multi-fuel grate that gives you the freedom to choose which fuel you want
to burn and set your grate to burn that fuel (be it wood, coal, smokeless fuel or peat) in the
most efficient way. See how easy it is to switch the grate in one simple movement from the
wood-burning to the solid-fuel burning mode; from the flat bed for wood burning to the open
grate for coal and smokeless fuel.
The grate employs an efficient riddling motion that neatly drops the ash into the pan below the
grate, whilst the doors are closed, to minimise any mess.
And then there is the ingenious QuattroflowTM air control system. This is what drives
the stove. So simple to operate; one single lever that pulls out to increase the burning rate and
pushes in to slow it to a gentle dancing flame. Simple though it is to operate, the way it controls
the airflow into the Chrnwood Island is sophistication itself. The QuattroflowTM air
control system ensures beautifully clear glass. Through a series of carefully controlled air
flaps, it introduces pre-heated primary, secondary and tertiary air, into the stove at just the
right place and in just the right amounts.
|
 |
|
For low burning the QuattroflowTM air control also allows a small amount of bypass air into
the flue to minimise condensation and helps maintain the high efficiency of the Island stove. This
results in a stove that burns with incredible cleanliness. Because volatile products from the fuel
are fully burnt within the Charnwood Island, there is a large reduction in combustion products that emit
into the flue. The stove burns with high efficiency and emmissions to atmosphere are reduced accordingly.
It all works in favour of our environment, good for you; good for everyone.
Look at the build quality of the Charnwood Island. Here is a range of stoves that comes from a British
manufacturer with over 30 years experience devoted to the design and development of quality multi-fuel
stoves. This is what will give you peace of mind. Using high tech laser cutting and robotic welding
facilities Charnwood have produced the Island, with simplicity of form and superb hand finish. The
best combination of quality British cast iron, heavy guage boiler plate steel and insulated brick
lining has been put together to produce this ultra efficient and quality range of stoves.
With three models and a number of options, there is a choice to suit all.
|
| Island I |
| Heat Output to Room: |
2-6kW (6,800-20,500 Btu/hr) |
| Room Capacity: |
Approx. 85m3 (room size 5m x 6m x 2.7m) |
| Flue Outlet: |
Top or Rear 150mm (6") dia |
| Maximum Log Length: |
370mm(14½ ") |
| Weigth: |
130kg |
| Colours: |
Black, Green, Blue or Brown |
| Island II |
| Heat Output to Room: |
3-8kW (10,200-27,300 Btu/hr) |
| Room Capacity: |
Approx. 110m3 (room size 5m x 8m x 2.7m) |
| Flue Outlet: |
Top or Rear 150mm (6") dia |
| Maximum Log Length: |
440mm(17¼ ") |
| Weigth: |
140kg |
| Colours: |
Black, Green, Blue or Brown |
| Island III |
| Heat Output to Room: |
4-12kW (13,600-40,900 Btu/hr) |
| Room Capacity: |
Approx. 173m3 (room size 8m x 8m x 2.7m) |
| Flue Outlet: |
Top or Rear 178mm (7") dia |
| Maximum Log Length: |
550mm(21½ ") |
| Colours: |
Black |
|
